Author Topic: New from MMB  (Read 13887 times)

0 Members and 1 Guest are viewing this topic.

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: New from MMB
« Reply #15 on: February 11, 2012, 03:07:36 »
Hi all. I haven't updated this thread for a while, so these are our latest offerings....

First off we have new cowl vents...
The dimensions are 19mm diameter and 62mm high.





Next we have a small deck winch/cargo winch..
Dimensions are 38mm long, 20mm wide & 18mm tall.



Also a smaller version of our modern tow winch...
Dimensions are 50mm long, 26mm wide & 23mm tall..
(The first pic is for size comparison...)





Finally we have an anchor winch kit...
Dimensions are 60mm long, 18mm wide & 20mm high.





All prices are on my website marksmodelbits.com or call me on 01633 431010


Mark.


I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: New from MMB
« Reply #16 on: March 22, 2012, 01:06:50 »
Hi every one, we have a couple of new fittings just released..

The first is a steam capstan which the base measures 43mm long x 26mm wide  and 25mm to top of capstan.

Price 4 + P&P






Second we have a lower profile bollard which measures 43mm long x 11mm wide x 12mm high.

Price 0.30p each + P&P




Website-  marksmodelbits.com
Email-  mmbshop@hotmail.com
Tel- 01633 431010

Mark.
I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: New from MMB
« Reply #17 on: April 18, 2012, 03:51:02 »
Hi everyone, due to many requests I now do rope fenders in another 2 sizes....

MEDIUM:
1x Bow fender      size approx 100mm long
1x Stern fender    size approx 95mm long
6x Side fenders    size approx 30mm long

SMALL:
1x Bow fender     size approx 70mm long
1x stern fender   size approx 80mm long
6x Side fenders   size approx 24mm long

Priced at 5 for the small set & 6 for the medium..  +P&P

Mark..

I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: New from MMB
« Reply #18 on: September 13, 2012, 04:37:45 »
Hi all, here is a long overdue update on what's going on in the MMB Skunkworks......

First off we have some new cowl vents..



Next we have 2 new fire extinguishers...





Next we have a new anchor winch/capstan ...





Finally we have a new tow winch kit....











Full details and prices are on my website http://marksmodelbits.com/

mmbshop@hotmail.com  or call 01633 431010

Mark..
I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.

TugMaster

  • Administrator
  • Admiral Poster
  • *
  • Posts: 1123
  • Welcome Aboard !
Re: New from MMB
« Reply #19 on: September 14, 2012, 02:24:33 »
Very nice bit of Kit

Hope that loop is hand spliced though  :) :)
Ok, so I like a drop !

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: New from MMB
« Reply #20 on: September 14, 2012, 03:50:28 »
I think I will have to fess up now .... I didn't make the masters & moulds for the winch & capstan, Hannah made these....

Mark..

I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.

TugMaster

  • Administrator
  • Admiral Poster
  • *
  • Posts: 1123
  • Welcome Aboard !
Re: New from MMB
« Reply #21 on: September 17, 2012, 01:56:57 »
Spot on, great to see she is showing you the ropes !  :)
Ok, so I like a drop !

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: New from MMB
« Reply #22 on: September 29, 2012, 10:02:04 »
Me & Hannah have been busy again....

We now have a large fairlead measuring 27mm long 9mm wide 10mm high 0.30p each + P&P

Also a 1/32nd scale oil drum 1.00 each + P&P

Mark & Hannah..
« Last Edit: November 02, 2012, 13:33:19 by tango »
I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.

TugMaster

  • Administrator
  • Admiral Poster
  • *
  • Posts: 1123
  • Welcome Aboard !
Re: New from MMB
« Reply #23 on: October 02, 2012, 09:39:09 »
"large"  :D :D :D :D :D

Some FAB item there Tango, great work !
Ok, so I like a drop !

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: New from MMB
« Reply #24 on: March 12, 2013, 12:35:35 »
Hi All, got a few more goodies fresh from the MMB skunkworks........

 
First up is a water tight hatch cover 61mm wide x 66mm front to back 3 each

 

Life raft canister, this is a big'un measuring 105mm long x 48mm diameter. It is supplied in 2 halves and is hollow to save weight....  4 each.



Next up is a nice little steam anchor winch...... Base front to back 40mm, side to side 36mm,
Total width across warping drums 46mm. Height (not including brake handles) 16mm
Price 6 each.



Last of all we have some nice 1/35th scale barrels and some not so nice dented ones...  Price is only 0.90p each!!!





All prices are + P&P

More details at marksmodelbits.com  Contact us at mmbshop@hotmail.com or the old fashioned way on 01633 431010..


Mark & Hannah.
I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: New from MMB
« Reply #25 on: April 29, 2013, 09:57:09 »
Hi All, we have just released this 1/12th scale crab/inshore fishing boat which can be found  in small harbours and fishing ports all around the UK...
The kit comprises of a GRP hull, GRP deck with plank detail and a GRP superstructure with window frames moulded in.

The hull is 39" long x 12 1/2" beam.

The price is only 150 + P&P.

We can supply a lot of the fittings including crab pots etc contact us for a list of what is available at the moment.

Now for the pics.......



Hull & superstructure as supplied.













We can be contacted at mmbshop@hotmail.com or by phone on 01633 431010.


Mark and Hannah..
I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.