Author Topic: Bugsier Gets Wet  (Read 2743 times)

0 Members and 1 Guest are viewing this topic.

Cragsider

  • Sr. Member
  • ****
  • Posts: 380
Bugsier Gets Wet
« on: June 07, 2011, 13:15:07 »
Eventualy after 3 years I fitted  my Bugsier 3  out with its Electrics.

Powering it are a 6 volt gel cell battery, a Motronic 15 amp speed controller and a Electronise 540 motor.

Allready fitted were a 3 blade prop running inside a steerable Kort.

It ran like a dream on the lake, with a good representation of scale speed, its is a little light at the stern so a bit more ballast will be added.

Peter.

Cragsider

  • Sr. Member
  • ****
  • Posts: 380
Re: Bugsier Gets Wet
« Reply #1 on: June 07, 2011, 13:18:55 »
One more of Bugsier a plan view from above.

Also on the lake was a fine example of an Envoy Tug in Naval guise.

Peter.

tugs53

  • Moderator
  • Admiral Poster
  • *****
  • Posts: 6632
Re: Bugsier Gets Wet
« Reply #2 on: June 07, 2011, 17:17:26 »
She's a beauty, as is the 'Envoy' class tug.
MIKE

Footski

  • Moderator
  • Admiral Poster
  • *****
  • Posts: 3284
  • Just me and my good lady
Re: Bugsier Gets Wet
« Reply #3 on: June 07, 2011, 22:40:28 »
As Mike says, beauties the pair...and good calm waters up there too.. :) :)
Barry

Model Tug Man

  • Site Supporter
  • Admiral Poster
  • *
  • Posts: 3115
Re: Bugsier Gets Wet
« Reply #4 on: June 10, 2011, 10:29:04 »
Beautiful job, sir. Well done. :) :)
VGJQ

Cragsider

  • Sr. Member
  • ****
  • Posts: 380
Re: Bugsier Gets Wet
« Reply #5 on: June 16, 2011, 13:42:38 »
As the Envoy Tug was well recieved I took another three pictures the following Sunday, sorry about the quality but I was using my Blackberry mobile.

However roll on Balne Moor this Sunday, I have my Nikon charged and ready to go  :D

I still have that tenner as well John  ;)

Peter.