Author Topic: WATER-JET CUTTING SERVICE  (Read 3062 times)

0 Members and 1 Guest are viewing this topic.

modelboatbits

  • Site Supporter
  • Newbie
  • *
  • Posts: 9
    • modelboatbits
WATER-JET CUTTING SERVICE
« on: January 11, 2011, 12:55:09 »
MODELBOATBITS are now able to offer a profile cutting service at a very competative low cost
that is available to the individual model builder to trade volume customers
We are now supplying MOUNTFLEET MODELS all their ply deck kit profiles

Our facility can  cut most materials used on model boats,  If you are looking for precision cutting
or just to save time then we are pleased to offer this service at a price that is very affordable.

Wood, plastic's and certain soft metal's  no charring like laser cutting

You can provide me your requirements in various formats: Drawing's, Templates of CAD Data ( DXF File format )

Being located in Telford, Shropshire we are centrally located for collection or we can ship by carrier

Please view photos below showing our facility.

Contact Steve for more details and enquiry's

Tel: 07921 032624
e-mail:  steve@modelboatbits.com
Pack up ya troubles in ya ol kit bag and
         " Smile,   Smile,   Smile "

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: WATER-JET CUTTING SERVICE
« Reply #1 on: January 12, 2011, 11:38:57 »
Hi all, I have seen the results that Steve achieves with this machine and the quality is absolutely fantastic and at a reasonable price as well.
So good in fact, I will be getting Steve to cut some of the fittings for my next kit release.....

Mark.
I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.

sea.mariner

  • Site Supporter
  • Admiral Poster
  • *
  • Posts: 4660
  • I Know a fair bit about tugs but am always learning !
Re: WATER-JET CUTTING SERVICE
« Reply #2 on: January 12, 2011, 11:46:02 »
So good in fact, I will be getting Steve to cut some of the fittings for my next kit release.....

Will this be for a semi kit of and Anchor Handler ?

http://modeltugforum.com/index.php?topic=3413.0

It does look a good bit of kit  :)

Regards, Dan.
Photos / Information, I nearly have them all !

tango

  • Moderator
  • Hero Member
  • *****
  • Posts: 820
Re: WATER-JET CUTTING SERVICE
« Reply #3 on: January 13, 2011, 14:48:30 »
Quote
Will this be for a semi kit of and Anchor Handler ?

Not just yet Dan, I have a couple of other projects to finish first.......

Mark.....
I HAVE NOT FAILED, I HAVE JUST FOUND A 1000 WAYS THAT DON'T WORK.

mersey dave

  • Hero Member
  • *****
  • Posts: 501
Re: WATER-JET CUTTING SERVICE
« Reply #4 on: January 15, 2011, 14:04:03 »


It does look a good bit of kit  :)

No Dan, you can't have one.........you would need a bigger workshop. ;D ;D ;D ;D


Regards Dave.

sea.mariner

  • Site Supporter
  • Admiral Poster
  • *
  • Posts: 4660
  • I Know a fair bit about tugs but am always learning !
Re: WATER-JET CUTTING SERVICE
« Reply #5 on: January 15, 2011, 14:17:49 »


It does look a good bit of kit  :)

No Dan, you can't have one.........you would need a bigger workshop. ;D ;D ;D ;D

No Dave, I would need a new wife  :)

Regards, Dan.
Photos / Information, I nearly have them all !