Author Topic: Heading Banner  (Read 2041 times)

0 Members and 1 Guest are viewing this topic.

model tugman

  • Site Supporter
  • Admiral Poster
  • *
  • Posts: 2712
Heading Banner
« on: January 25, 2014, 08:43:23 »
Hello is it only me or has the left hand banner picture been cut in half?   Geo
Tugs are for life      George B

2tugboats

  • Moderator
  • Hero Member
  • *****
  • Posts: 603
  • Roughly 3/4 inch scale semi accurate
    • Two Tugboats
Re: Heading Banner
« Reply #1 on: January 25, 2014, 10:12:20 »
I took a look George, and that is the original picture that I worked
from to make the banner picture. If anything, there is a foot of the
right hand wake less in the banner. It's not enough to even notice
unless you get out the Photoshop.

Have you or is there a picture with more landscape in the background?
The one I worked off from was a ten by twelve or so and I assumed
it to be the whole picture.

Let me know George,
Michael
Yet another case of why men and women go down to the sea in ships. . .A pleasure to be here and smell the salt air. Thank you Tugboat Forum. . .Michael in Anacortes, Washington www.twotugboats.com

model tugman

  • Site Supporter
  • Admiral Poster
  • *
  • Posts: 2712
Re: Heading Banner
« Reply #2 on: January 25, 2014, 10:47:00 »
Hi Micheal thanks for replying,But it is me having a senior moment ,my screen zoom was up to 110%  reset now to default and all is fine.   :-[ :-[ :-[ :-[ :'(
Tugs are for life      George B

Sloughmac

  • Sr. Member
  • ****
  • Posts: 488
  • Dire Straits
    • Finn Slough Heritage & Wetland Society
Re: Heading Banner
« Reply #3 on: January 25, 2014, 11:12:57 »
It certainly is all there.  And if I didn't say it before thanks for putting it up.  BTW I use a bit of zoom so I can read easily and on mine the RIGHT hand photo is cropped a bit till I zoom out to 100% again.  Oh well.

Ulrich



2tugboats

  • Moderator
  • Hero Member
  • *****
  • Posts: 603
  • Roughly 3/4 inch scale semi accurate
    • Two Tugboats
Re: Heading Banner
« Reply #4 on: January 25, 2014, 11:35:19 »
Thanks you guys. . .I was afraid that yet again, I screwed up. The worst mistake
I ever made was when, years ago, I sent my Mom the URL for my site at the time
which was not tugboat related. I sent her the URL for my now deceased friend's
URL who's Internet tastes were about 180 degrees from my metal art boats site
at the time. Needless to say, I received a disturbing email from my Mom.

So, I thank you for sharing the information about setting the viewing of one's screen,
I didn't know that.

See you later,
Michael
Yet another case of why men and women go down to the sea in ships. . .A pleasure to be here and smell the salt air. Thank you Tugboat Forum. . .Michael in Anacortes, Washington www.twotugboats.com

thelongbuild

  • Sr. Member
  • ****
  • Posts: 398
    • Runcorn & District Scale Model Boats
Re: Heading Banner
« Reply #5 on: January 25, 2014, 14:56:47 »
something is up as my screen is normally set for 125% and the tug forum used to be all in the screen, however now I have to scroll across unless I manually adjust to 1oo %, Just tested on Mayhem and altered settings from 100 to 150% and the site auto adjusts but always stays within the screen so can only assume that in the Mod/admin is there a tick box to auto adjust ?.. angel
« Last Edit: January 26, 2014, 11:36:47 by thelongbuild »
Next Build M.S.C Volant after 1 other.

Model Tug Man

  • Site Supporter
  • Admiral Poster
  • *
  • Posts: 3115
Re: Heading Banner
« Reply #6 on: January 28, 2014, 11:08:20 »
After splicing the main brace mine appears to be upside down.
VGJQ

model tugman

  • Site Supporter
  • Admiral Poster
  • *
  • Posts: 2712
Re: Heading Banner
« Reply #7 on: January 28, 2014, 11:42:22 »
After splicing the main brace mine appears to be upside down.

I didn't like to sat too much MTM but that may have had a small effect on my problem ;) ;) ;)
Tugs are for life      George B

TugMaster

  • Administrator
  • Admiral Poster
  • *
  • Posts: 1123
  • Welcome Aboard !
Re: Heading Banner
« Reply #8 on: January 28, 2014, 12:26:17 »
I have recently adjust the width of the forum...this may be the issue ....if this is causing issues I'll put it back ....any thoughts ?
Ok, so I like a drop !

des

  • Sr. Member
  • ****
  • Posts: 388
Re: Heading Banner
« Reply #9 on: January 28, 2014, 12:31:44 »
It suits me as it is.  Previously I had to set my screen zoom to 95% to fit the whole page onto the screen;  now I can see the whole page AND the sidebar ads at 100% zoom.  I like it.

Des.

Model Tug Man

  • Site Supporter
  • Admiral Poster
  • *
  • Posts: 3115
Re: Heading Banner
« Reply #10 on: January 29, 2014, 11:05:48 »
Working just fine, TugMaster.
VGJQ