Author Topic: 70mm steerable Kort nozzle and 4 blade brass propeller  (Read 1237 times)

0 Members and 1 Guest are viewing this topic.

fastfaz

  • Full Member
  • ***
  • Posts: 165
70mm steerable Kort nozzle and 4 blade brass propeller
« on: February 07, 2016, 11:32:47 »
     Hi all,
         I am looking for a 70mm steerable Kort nozzle and 4 blade brass propeller, if anyone has one they would like to sell could you please PM me with the details.
     Cheers,
           Faz.
The photo is my Lowgarth Mountfleet models but my own design and build (the kit quality and fit was very poor) I scatch built the superstructure from photos of the Foylegarth and scaled it off the figures. Sails superbly.

olscuzbut

  • Sr. Member
  • ****
  • Posts: 469
  • Keep on tuggin'
Re: 70mm steerable Kort nozzle and 4 blade brass propeller
« Reply #1 on: February 07, 2016, 17:29:31 »
If you don't come up with one Faz, have you thought of building a steerable Kortz?  Built two nozzles (not steerable) for my current build from black PVC pipe. 

Puffin

  • Admiral Poster
  • ******
  • Posts: 1432
  • WestMinster Apache
Re: 70mm steerable Kort nozzle and 4 blade brass propeller
« Reply #2 on: February 13, 2016, 12:21:45 »
HI THERE OLD SCUZBUTT ,  What size is that in inches ? I have some brand new in box drives .

puffin

olscuzbut

  • Sr. Member
  • ****
  • Posts: 469
  • Keep on tuggin'
Re: 70mm steerable Kort nozzle and 4 blade brass propeller
« Reply #3 on: February 13, 2016, 15:50:54 »
Hi Glenn,  good to see you still got your fingers in the forum.  The 70mm converts to 2.755 inches. 

            Norm