Author Topic: Ropewolk  (Read 2534 times)

0 Members and 1 Guest are viewing this topic.


  • Jr. Member
  • **
  • Posts: 75
    • RC Tug
« on: August 27, 2016, 00:13:30 »
Welcome to your needs I made a machine for twisting wire modeling.
Twister ropewolk is made of aluminum and is driven by an electric motor. It has a full speed control from 40-900 rpm / min. I put photos and video of how it works

Here the older version to show the principle of operation of Ropewalk
« Last Edit: August 27, 2016, 00:16:59 by romanov »


  • Moderator
  • Hero Member
  • *****
  • Posts: 609
  • Roughly 3/4 inch scale semi accurate
    • Two Tugboats
Re: Ropewolk
« Reply #1 on: August 27, 2016, 16:39:04 »
Excellent Romanov. . .your twisting machine works like a charm and makes perfect woven line.
And, I am impressed with your taking the time to make the "twisters" look good with different
colored parts.

I would have liked to have one 50 years ago when I made the twisted wire roping for an all
metal "Dutch Merchant" I built. I had to put the ends of 1/16 inch wire in the vice, clamp
a pair of "Vice Grips" on the other end and twist away for hours to achieve the same results.

Thank you for sharing - new tools are tops around the Forum here.

Yet another case of why men and women go down to the sea in ships. . .A pleasure to be here and smell the salt air. Thank you Tugboat Forum. . .Michael in Anacortes, Washington