Author Topic: steam drifter / herring drifter  (Read 175 times)

0 Members and 1 Guest are viewing this topic.

Toby

  • Site Supporter
  • Sr. Member
  • *
  • Posts: 328
steam drifter / herring drifter
« on: August 03, 2017, 19:10:47 »
Is this type of vessel included in this forum?

The reason for my silence lately in regard to Perseverance is that I have been working on a model of Vliestroom of the Dutch Coastguard and also  a 1:24 P on F Herring /Steam Drifter. 

If such is not a part of this forum but there are members who have info   and/or models etc etc perhaps they would send a private message to me.


Thanks Toby.




des

  • Sr. Member
  • ****
  • Posts: 379
Re: steam drifter / herring drifter
« Reply #1 on: August 04, 2017, 00:26:09 »
G'day Toby - for those two boats it may be appropriate to post in the Barges & Non-Tug Vessels area.  Keep posting, 'cos many of us are interested in most types of workboats, not just tugs.

Des

Toby

  • Site Supporter
  • Sr. Member
  • *
  • Posts: 328
Re: steam drifter / herring drifter
« Reply #2 on: August 04, 2017, 06:42:04 »
Thanks Des,

Will do as you suggest later.

Toby

Toby

  • Site Supporter
  • Sr. Member
  • *
  • Posts: 328
Re: steam drifter / herring drifter
« Reply #3 on: August 12, 2017, 04:57:28 »
Working on the drifter. Sorted out some paint cracking problems and faults with planks.

Can anyone tell me whether these boats would have had red paint as in red or would it be effectively the red oxide colour I need to put on.

Will sort some pictures shortly.

Still want details for deck and superstructure. ....photos or photos of drawings would be a help of anyone can oblige.  My line drawing does not state details.


Also anyone know if and where the would be wash ports in the bulwarks.  Surely there would be some outlet for water somewhere?


Toby

Toby

  • Site Supporter
  • Sr. Member
  • *
  • Posts: 328
Re: steam drifter / herring drifter
« Reply #4 on: August 16, 2017, 09:11:12 »
Cutting out a rudder. It measures 66mm front to back.  Is this too big for it would equate to 6ft 6". I see in a photo of a full size rudder wreck that the rudder was made up from planks and on a model I have seen a photo showing view of the rudder  with 5 planks.

I have cut the shape from a piece of plastic/aluminum sandwich sheet which is 3.5mm thick. I was thinking then of adding lolipop sticks (2mm thick) to both sides for the effect.

How many and how wide and thick were the planks for the rudder generally for such boats and were they originally held together in some way in addition to the metal brackets from the rudder axle. Also although on models the rudder is painted 'red'  in keeping with the hull was this the case in reality?


The lollipop sticks are 10mm wide so that equates to 10" planks. Too small or to big?

Any thoughts,  anyone.

Toby

  • Site Supporter
  • Sr. Member
  • *
  • Posts: 328
Re: steam drifter / herring drifter
« Reply #5 on: August 16, 2017, 09:20:57 »
Found these but. ......